Conditional sea surface statistics and their impact on geophysical sea surface parameters retrieved from SAR altimetry signals

In this study we present an analytical formulation of synthetic-aperture radar (SAR) altimetry signals including narrow banded nonlinear wave fields and conditional statistics between wave elevation displacements, horizontal wave slopes and vertical wave particle velocities. Considering the wave elevation displacements coskewness with respect to horizontal slopes leads to an analytical formulation of the electromagnetic bias within a SAR-mode altimeter stack. This formulation can be either parametrized by the significant wave height (SWH) and mean wave steepness, or in terms of the variance of vertical wave velocities. The effect of conditional vertical wave particle velocity variances with respect to the observed horizontal wave slopes close to nadir incidence angles leads to an effective reduction of the azimuth blurring of SAR-mode stacks. We present here a formulation of this effect by examining JONSWAP ocean wave spectra. In most cases this effect reduces the azimuth blurring by 10% to 30%. Additionally we investigate the effect of a nonlinear wave elevation displacement probability density function (PDF) on estimated geophysical parameters. We were able to show that including an elevation displacement skewness of 0.13 improves significantly the SWH consistency between altimetry and ECMWF Reanalysis v5 ERA5 results.All of these effects are validated with respect to ERA5 model data in the North East Atlantic region and in situ data located in the German Bight and Baltic Sea.The developed model can be used in both SAR and conventional altimetry retrackers.     

上升段飞行器目标的视频图像跟踪

粒子滤波是一种基于贝叶斯估计理论和蒙特卡罗理论的实时目标跟踪方法，具有较为灵活的并行化跟踪方式，能够较好地维持跟踪目标的假设状态，具有较好的跟踪效果和鲁棒性。上升段飞行器目标飞行视频图像跟踪是火箭等目标飞行监控的重要阶段，但现阶段对飞行器上升段的视频图像跟踪主要依靠人工手动操作云台控制器，实现视频图像中的飞行器跟踪，跟踪图像存在跟踪滞后、画面抖动等现象，跟踪效果受人为因素影响较大。本文提出一种基于粒子滤波方法的上升段飞行器目标视频图像跟踪方法，建立飞行器目标粒子滤波跟踪模型实现对飞行器目标的识别和跟踪，在识别和跟踪的基础上建立云台控制模型，通过对云台的智能控制获得飞行器上升段的高质量图像。采用火箭发射的视频图像作为模型验证的实验数据，检验飞行器目标的跟踪效果。     

涡轮基组合循环发动机分布式控制系统通信网络混合拓扑结构优化方法

涡轮机组合循环(Turbine based combined cycle,TBCC)发动机控制系统通信网络拓扑结构是其分布式控制系统方案设计的重要部分,优化网络拓扑结构可提高发动机推重比和控制系统可靠性。本文基于智能优化算法提出TBCC分布式控制系统网络拓扑结构优化方法。基于图论建立TBCC几何模型和网格模型,以重量和可靠性为优化性能指标,同时考虑发动机表面高温区域以及控制节点的工作可靠性,分别采用粒子群算法和遗传算法优化星形结构中智能中央节点位置、中央节点的环形拓扑结构,获得星形-环形混合拓扑结构。仿真实例表明,基于本文方法优化所得的混合拓扑结构相较于星形集中式控制结构,系统重量降低了51.9%。     

稠密颗粒增强复合材料应变分布规律和刚度张量

针对高体积份数、随机分布、等轴状颗粒增强复合材料 ,研究了材料的应变分布规律 ,给出了基体和增强体应变平均值与材料微观结构参数之间的定量关系。结果表明 ,除应变平均值外 ,应变涨落是影响刚度张量的另一个重要因素 ,研究了应变涨落与材料微观结构参数之间的关系 ,并推导出了复合材料的刚度张量。与实验结果和以往的理论比较 ,预测结果与实验结果吻合良好     

Solar and Heliospheric Modulation of Galactic Cosmic Rays

The significance of external influences on the environment of Earth and its atmosphere has become evident during recent years. Especially, on time scales of several hundred years, the cosmogenic isotope concentration during the Wolf-, Spoerer-, Maunder- and Dalton-Minimum indicates an increased cosmic ray flux. Because these grand minima of solar activity coincide with cold periods, a correlation of the Earth climate with the cosmic ray intensities is plausible. Any quantitative study of the effects of energetic particles on the atmosphere and environment of the Earth must address their transport to Earth and their interactions with the Earth’s atmosphere including their filtering by the terrestrial magnetosphere. The first problem is one of the fundamental problems in modern cosmic ray astrophysics, and corresponding studies began in the 1960s based on Parker’s cosmic ray modulation theory taking into account diffusion, convection, adiabatic deceleration, and (later) the drift of energetic particles in the global heliospheric magnetic field. It is well established that all of these processes determining the modulation of cosmic rays are depending on parameters that are varying with the solar magnetic cycle. Therefore, the galactic cosmic ray intensities close to Earth is the result of a complex modulation of the interstellar galactic spectrum within the heliosphere. The modern view of this cosmic ray modulation is summarized in our contribution.     

等质量异形粒子超高速撞击侵蚀

用数值方法模拟双锥，圆柱，椭球、圆锥和倒圆锥五类等质量异形铝粒子五种高宽比共２５种粒子对半无限铝靶的超高速撞击侵蚀，撞击速度为４ｋｍ／ｓ，给出了坑深、坑径、坑形参数和坑体积随粒子形状及高宽比的变化曲线。结果与非圆球异形粒子超高速撞击侵蚀计算有重要参考价值。     

基于粒子群优化算法的不完全数据的处理

不完全信息下的数据挖掘是一个困难的问题，但它在实际决策中是不可避免的。在介绍几种处理方法的基础上，提出了基于粒子群优化算法的处理方法。对适应函数进行了讨论，实例表明该方法比较有效。     

空间能量粒子探测方法研究

阐述了空间能量粒子探测的原理和方法。介绍了国外在能量粒子探测方面所采用的半导体望远镜测量法、电场加速法、磁偏转法等方法，分析了它们各自的优缺点。就制约能量粒子探测技术发展的关键因素进行了讨论。并以此为基础，结合我国实际情况提出了一种新的探测方法。     

煤粉粒径分布在气固两相流场中的测试技术研究

针对输送管道内煤粉颗粒的粒径分布宽的特点，用侧向接收散射光的Mie散射方法和Fraunhofer衍射方法作了理论分析和实际测试。利用分子筛和显微镜对被测粒子进行了静态测量，其结果可以作为相对准确的测量标准。研究结果表明，针对细粉分离器内煤粉颗粒的形状、浓度和粒径的分布规律，用衍射测试方法可以达到较高的测试精度，取得较好的测试效果。     

磁粉检验标准环形试块的机理分析

为了分析控制磁粉检验系统综合性能的标准环形试块的机理，首先建立一个计算漏磁场的简化数学模型，然后解标量磁位的=维拉普拉斯方程，求出被磁化的环形试块上圆孔产生的漏磁场，计算环形试块表面的磁粉受力，分析其特点并得出相应的结论。